Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products.
Apple makes no representations regarding third-party website accuracy or reliability. Contact the vendor for additional information. If you use managed switches, ensure that they allow EEE to be disabled. Make sure that EEE is disabled on all ports used for real-time Dante traffic. If you use unmanaged switches, make sure to not use network switches that support the EEE function, since EEE operation cannot be disabled in these switches. Caution after updating When using Dante Firmware of a version earlier than V3.
Initialize the devices. XMV V3. The XMV firmware is included in the downloaded zip file. Added the following redundancy functions. Backup mode: Switches to analog input when the pilot tone of the digital input is interrupted due to a broken connection or other problem. Override mode: Switches the digital input to a specified analog input when analog audio is detected.
Which means that midPoint 4. There were numerous changes in internal code structure, most notably changes in Prism and GUI. Heavy customizations of midPoint 3. As all real-world software midPoint 4.
Full list of the issues is maintained in bug tracking system. As far as we know at the time of the release there was no known critical or security issue. There is currently no plan to fix the known issues of midPoint 4.
These issues will be fixed in future maintenance versions of midPoint only if the fix is covered by a support agreement or subscription. No other issues will be fixed - except for severe security issues that may be found in the future. The known issues of midPoint 4. This depends on the available time, issue severity and many variables that are currently difficult to predict.
The only reliable way how to make sure that an issue is fixed is to purchase midPoint support. Or you can fix the bug yourself. MidPoint is always open to contributions.
This may seem a little bit harsh at a first sight. But there are very good reasons for this policy. And in fact it is no worse than what you get with most commercial software. We are just saying that with plain language instead of scrambling it into a legal mumbo-jumbo. Some of the changes related to approval cases are not shown MID There is a support to set up storage of credentials in either encrypted or hashed form. There is also unsupported and undocumented option to turn off credential storage.
This option partially works, but there may be side effects and interactions. This option is not fully supported yet. Do not use it or use it only at your own risk. It is not included in any midPoint support agreement. Native attribute with the name of 'id' cannot be currently used in midPoint MID If the attribute name in the resource cannot be changed then the workaround is to force the use of legacy schema. In that case midPoint will use the legacy ConnId attribute names icfs:name and icfs:uid.
Majority of the work on the Gutenberg release was done by the Evolveum team. However, this release would not be possible without the help of our partners, customers, contributors, friends and families. We would like to express our thanks to all the people that contributed to the midPoint project both by providing financial support, their own time or those that maintain a pleasant and creative environment for midPoint team.
However, midPoint project would not exist without proper funding. Therefore we would like to express our deepest gratitude to all midPoint subscribers that made midPoint project possible. Planned release dates are just that: they are planned. We do not promise or guarantee release dates. Software development is a creative activity that includes a lot of inherent risk.
We are trying really hard to provide the best estimates. We are not able to provide precise dates for releases or deliveries.
Do not rely on midPoint release dates. Plan your project properly to address the risk of delayed midPoint releases. Planned scope of midPoint releases is also an estimate. MidPoint development process always includes the balancing of the iron triangle.
Therefore planned release scope may change at any time. There is a method to make sure that midPoint releases will work well for your project and that method is platform subscription.
We do not make any claims that midPoint is perfect. Quite the contrary. MidPoint is a practical software, developed by living and breathing developers and deployed in a real world. There are both known and unknown issues in midPoint.
Also, midPoint is not feature-complete. New features are introduced in midPoint all the time. But not all of them are completed. There are always some limitations. Please do not rely on midPoint functionality that you have not tested to make sure that it works. MidPoint support and subscription programs are a way how to handle those issues. But even with support service, do not rely on functionality that is not documented. If you plan to use undocumented or non-existing functionality, platform subscription is the right service for you.
C MidPoint 3. MidPoint Releases MidPoint 4. Changes With Respect to Version 4. Audit log viewer improvements Option to disable count on pages that list objects. Support for. NET remote connector server is deprecated. Changes With Respect to Version 3. Object Collections and Views Sections virtual containers in object details Dashboards and status reports experimental Shopping cart improvements Reworked "projections" tab Ability to set custom name for midPoint Case management improvements experimental Session management page Minor user experience improvements.
Support for PolyStrings all the way to the connector experimental Asynchronous messaging connector options prototype Improved shadow consistency with primaryIdentifierValue property Support for seach hierarchy scope.
Mapping range pre-defined sets Mapping state properties Support for populate expressions in autoassignments Task management in cluster is using REST Autogenerated node identifier in a cluster Support for attachments in mail notifications Whitelists for notifications Support for expression in mapping time constraints Partial support for polystring "lang" and translations experimental Miscellaneous clustering improvements Many improvements in reconciliation and synchronization tasks.
Support for Oracle Java builds is limited see below. Activiti BPM that was used as "workflow engine" was removed from midPoint. Release of overlay projects and other associated artifacts is planned after 4. Purpose and Quality Release 4. Platforms MidPoint is known to work well in the following deployment environment.
Java OpenJDK 11 This is a recommended platform. OpenJDK 8 1. Web Containers MidPoint is bundled with an embedded web container. Apache Tomcat 8. Databases MidPoint supports several databases. MariaDB Support for SQL Server is deprecated. Supported Browsers Firefox any recent version Safari any recent version Chrome any recent version Opera any recent version Microsoft Internet Explorer version 9 or later.
Microsoft Internet Explorer compatibility mode is not supported. Upgrade MidPoint is software that is designed for easy upgradeability. Major Release 4.
Upgrade from midPoint 4. Upgrade from midPoint 3. There were numerous schema changes that are described below. Schema changes since 3. Upgrade process Flowing steps are an outline of an upgrade process:. Back up your configuration and data. Stop all tasks, disable end user access to user interface. Shutdown midPoint. Update midPoint distribution binaries. Run database migration scripts. Start midPoint. Make sure that tasks are stopped and end user access is disabled.
Update customized initial objects as needed. Re-add iterationSpecification element to object templates. Update connector references in the resources. Run shadow refresh task to populate primaryIdentifierValue in shadow objects. Mind the warnings in log files. The other is that the default raster fonts only include directional single quotes and not directional double quotes which will probably be rendered as a filled rectangle. They are also used in HTML help, where most browsers use fonts which render them correctly.
The font used can affect whether quotes are rendered correctly. The default font in the Rgui console and internal pager is Courier New , which has directional quotes on all the systems we tried.
Lucida Console which has elegant glyphs for directional quotes but seems rather light unless ClearType is in use : Consolas is another font which we often select when ClearType is in use.
Non-TrueType fonts such as Courier and FixedSys lack directional double quotes on the systems we tried. There is a related problem with using Sweave output in Rgui , for LaTeX needs to be told about the encoding of directional quotes by including in the LaTeX preamble e. Where tilde does not appear on the main keyboard, it can normally be accessed by pressing AltGr the right Alt key plus some other key. On all Windows versions you should be able to get tilde by holding the down the left Alt key and typing on the numeric keypad if you have one , then releasing the Alt key.
The bit build of R for Windows will run on both bit and bit 2 versions of Windows. The advantage of a native bit application is that it gets a bit address space and hence can address far more than 4GB how much depends on the version of Windows, but in principle 8TB. The disadvantages are that all the pointers are 8 rather than 4 bytes and so small objects are larger and more data has to be moved around, and that less external software is available for bit versions of the OS.
And similarly for bit Microsoft Office. Obviously, only relevant if the machine is running a bit version of Windows — simply select both when using the installer. You can also go back and add bit components to a bit install, or vice versa. For many Registry items, and bit programs have different views of the Registry, but clashes can occur. The most obvious problem is the file association for. RData files, which will use the last installation for which this option is selected, and if that was for an installation of both, will use bit R.
The R installer does not put Rcmd. What seems to have happened is that people did this for themselves in the past, upgraded R which by default will install to a different location and un-installed the old version of R.
How you set the path depends on your OS version. System policies can prevent end users making changes. The simple way to do it just for the command prompt is to write a little batch file setpath. Apparently some users want 3 Windows in their native language, but not R. Western installations of Windows often do not have such support. So we need to assume that your copy of Windows does. Both Rterm. It will be necessary to select suitable fonts in files Rconsole and Rdevga see?
Note that Rdevga only applies to Windows graphics devices and not, say, to pdf. Note that it is important that the console font uses double-width characters for all CJK characters as that is what the width table used assumes : this is true for the fonts intended for CJK locales but not for example for Lucida Console or Consolas. You do need to ensure that R is running in a suitable locale: use Sys. When using Rterm the window in which it is run has to be set up to use a suitable font e.
Precisely, you selected English for installation! The language of the installer has nothing to do with the language used to run R: this is completely standard Windows practice and necessary as different users of the computer may use different languages.
Similar comments apply to any non-Western-European language. With suitable fonts, this should just work. You will need to set MS Mincho or MS Gothic as the console font to ensure that single- and double-width characters are handled correctly. The default graphics fonts for the windows graphics device can handle most common Japanese characters, but more specialized fonts may need to be set.
See Q5. The help for windowsFonts has examples of selecting Japanese fonts for the windows family of devices. In addition, the Hershey vector fonts see? Hershey ,? Japanese and demo Japanese can be used on any graphics device to display Japanese characters. To use non-Latin-1 characters in the postscript graphics device, see its help page which also applies to pdf. You need to specify a font in Rconsole see Q5.
This used to be a problem in earlier versions of Windows, but now it is hard to find a font which does not. Support for these characters within Rterm depends on the environment the terminal window and shell, including locale and codepage settings within which it is run as well as the font used by the terminal window. Those are usually on legacy DOS settings and need to altered. In most cases they actually are, but by Windows. If you have Windows running completely in say French or Chinese these settings are likely to be consistent.
However, if you try to run Windows in one language and R in another, you may find the way Windows handles internationalization slightly odd. You can install binary packages either from a repository such as CRAN or from a local. There are menu items on the Packages menu to provide a point-and-click interface to package installation. The packages for each minor 4. Note that setting up Windows to install a source package that needs compilation is rather tricky; please do ensure that you have followed the instructions exactly.
This will only be used if it exists so you may need to create it: you can use. If you use install. This will also happen if update. In particular, the detection that a standard user has suitable permissions appears to be unreliable under Vista, so we recommend that you do create a personal directory yourself.
Is the package installed for this version of R? Packages need to have prepared for R 4. Windows will normally give an informative message about a certain DLL not being found.
0コメント